Enviro Forest Digital Ultrasonic Flow Meter

Enviro Forest digital ultrasonic flow meter is designed to measure volumetric flow of within closed conduit, the pipeline must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.

SKU: EFOUMFM-216 Category:

Overview

Enviro Forest digital ultrasonic flow meter is designed to measure volumetric flow of within closed conduit, the pipeline must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4 mA to 20 mA, OCT outputs. 4 mA to 20 mA/OCT output Clamp on Ultrasonic flowmeter Doppler effect could be widely used to sewage water, sanitary sewage,domestic waste water,chemical liquids, groundwater,industrial wastewater, slurry, paper slurry, pulp, activated sludge, return activated sludge, waste activated sludge, drainage, mining recirculation, animal renderings and other dirty liquids for full filled pipe. Its integral battery provides continuous operation for up to 14 hrs on a full-charge. The battery is “maintenance free”, but it still requires a certain amount of attention to prolong its useful life.

 Features

  • Suitable for pipe sizes ranging from 1.5 in to 157.4 in (40 mm to 4000 mm)
  • Excellent low flow rate measurement ability, low to 0.05 m/s
  • A wide range of flow measurement
  • High flow rate can reach 12 m/s
  • High-temperature transducer
  • No need to shut down the pipe flow when installing transducers
  • User-friendly configuration
  • 4 mA to 20 mA, OCT outputs
  • 0% calibrated span accuracy
  • Rechargeable battery can work up to 14 hrs

 Technical Specification

 

Resolution 0.25 mm/s
Repeatability 0.5% of reading
Accuracy 0.5% F.S to 2.0% F.S.
Response time 2 s to 60 s for optional
Flow Velocity Range 0.05 m/s to 12 m/s
Liquid Types Supported Liquids containing 100 ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.
Power Supply AC: 85 V to 265 V
Enclosure type Handheld
Degree of protection IP 65 according to EN60529
Operating temperature -4 °F to 140 °F (-20 ℃ to 60 ℃)
Housing material ABS
Measurement Channels 1
Display 2 line × 8 characters LCD, 8 digit rate or 8 digit total (resettable)
Units User Configured (English and Metric)
Rate Rate and Velocity Display
Totalized gallons, ft³, barrels, lbs, liters, m³, kg
Communication 4 mA to 20 mA, OCT output
keypad 6 pcs buttons
Size Transmitter: 9.3 in x 4.9 in x 1.6 in (237 mm x 125 mm x 42 mm)
Case: 16.1 in x 12.5 in x 3.14 in  (410 mm x 320 mm x 80 mm)
Weight 1.3 lb (0.6 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Forest Digital Ultrasonic Flow Meter”

Your email address will not be published. Required fields are marked *