Enviro Forest Mini Spectrum Analyzer

Enviro Forest Mini Spectrum Analyzer is a very cost-effective USB mini spectrum analyzer. It can do most of the basic test items that a general spectrum analyzer can do. TSA6G1 is a very tiny instrument, but it can cover a very wide measurement range.

SKU: EFOSA-179 Category:

Overview

Enviro Forest Mini Spectrum Analyzer is a very cost-effective USB mini spectrum analyzer. It can do most of the basic test items that a general spectrum analyzer can do. TSA6G1 is a very tiny instrument, but it can cover a very wide measurement range. The frequency up to 8.15 GHz, power up to 1 W, noise level as low as -110 dBm. The test data will be displayed with calibrated level, linearity and frequency. Enviro Forest Mini Spectrum Analyzer (TSA8G1) is very suitable for field tests because it is very small and convenient to carry. It can be used as a device to monitor RF signal. It is also suitable for the EMC test with near field probe. Remote feature allows the product to be controlled remotely from far end computer via the internet. This allows easy setup of the RF monitor system.

 

Features

• Accurate and stable in frequency / level
• Extra low cost, extra low weight, best performance price rate
• Digitally synthesized RF system
• Frequency range up to 8.15 GHz
• Input Levels – 110 dBm to +30 dBm
• Connect to PC through USB without battery pack

 

Technical Specifications

Frequency: Band1: 1 MHz to 5 GHz,Band2: 5 GHz to 8.15 GHz
Minimum Step for Scanning: 2 kHz at 1 MHz SPAN
Frequency Stability: < +/-5 ppm with software calibration
Frequency Spans: 1 MHz to 1000 MHz for normal scanning (501 scanning points) 6 MHz to 500 MHz for fast scanning (250 scanning points)
Resolution Bandwidths: 50 KHz, 100 KHz, 200 KHz, and 500 KHz, auto setting and free setting
Sweep Time: x1 to x32, basic scanning is around 2.3 s, fast scan is around 0.2 s
Input Level Range: -110 dBm to +30 dBm
Input Level Overload: Less than +20 dBm for 1 minute max at any scale when external attenuator is not connected. DC block to +/-25 VDC Less than +33 dBm when external attenuator is connected.
Reference Level Accuracy: < 3 dB between 100 MHz to 4.15 GHz at top level (1 GHz)
Display Range Linearity: < 4 dB (1 GHz)
Reference Level Flatness: < 2 dB within 100 MHz span at top level
Reference Level Range: -60 dBm to 0 dBm range without external attenuator -30 dBm to 30 dBm range with external attenuator
Display Range: 80 dB usable
Noise Floor: -115 dBm with 5 MHz SPAN and -60 dBm reference level at 1 GHz
Power Source: 5 V from USB port
Dimensions (Length x Width x Height): 3.44 in x 0.90 in x 0.59 in (87.5 mm x 23 mm x 15 mm)

Reviews

There are no reviews yet.

Be the first to review “Enviro Forest Mini Spectrum Analyzer”

Your email address will not be published. Required fields are marked *