Enviro Forest Spectrum Signal Generator

Overview

Enviro Forest spectrum signal generator is a simple portable spectrum analyzer and signal source designed to display the signal spectrum from 35 MHz to 6200 MHz and the analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all widely used technologies Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, another important feature is its tracking generator, which makes it possible to measure the frequency response of passive or active devices (such as filters or amplifiers) The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures. It is mainly used for on-site operation. The equipment is sturdy and durable, light in weight, and low in energy consumption. It enables service centers and maintenance teams to perform on-site HF analysis for commissioning and repair work. In addition, the spectrum analyzer is the perfect solution for repair shops and radio enthusiasts.

Features

(8.12 cm) 3.2 in color resistive touch screen
35 MHz to 6200 MHz frequency range
500 points per sweep
2 dB accuracy in 70 dB to 75 dB dynamic range
Windows compatibility
PC connectivity
Convenient use
Compact size 5.91 in x 2.95 in x 0.91 in (150 mm x 75 mm x 23 mm)
Lightweight 0.83 lb (380 g)
4-hour independent power supply
Wired data transmission to PC

Technical Specifications

Display Frequency Range	35 MHz to 6200 MHz
Dynamic Range	75 dB (35 MHz to 3000 MHz), 70 dB (3000 MHz to 4500 MHz)
Max Span	6165 MHz, Bandwidth 200 kHz
Scanning Speed	700 MHz or sec (above 100 MHz)
Sweep (100 MHz)	< 0.25 seconds
Noise Floor	-90 dBm (up to 3000 MHz), -85 dBm (3000 MHz to 4500 MHz), -80 dBm (4500 MHz to 6200 MHz)
Impedance	50 ohms, Wave Ratio < 1.5
Attenuator	0 dB to 30 dB, Error (up to 10 dB) 2 dB
Tracking Generator Output Power	-15 dBm to -25 dBm
Accuracy in Dynamic Range	2.0 dB
Max Input Power	10 dBm
Max Input Power	+20 dBm
Max Input Measurement Signal	+10 dBm
Max Input DC Voltage	25 V
Max Current Consumption	450 mA
Max Current Consumption	500 mA (when charging)
Battery Charge Time	Up to 5 hours
Display	(8.12 cm) 3.2 in color resistive touch screen
Frequency Range	35 MHz to 6200 MHz
Sweep Speed	500 points per point
Measurement Accuracy	2 dB within 70 dB to 75 dB dynamic range
Battery	2500 mAh
Wave Impedance	50 ohms
Accuracy in Dynamic Range	2 dB
Maximum Input DC Voltage	25 V
Size	5.91 in x 2.95 in x 0.91 in (150 mm x 75 mm x 23 mm)
Weight	(380 g) 0.83 lb