Overview

Enviro Forest signal analysis spectrum analyzer and signal source designed to display the signal spectrum from 35 MHz to 6200 MHz the analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. Another important feature is its tracking generator, which makes it possible to measure the frequency response of passive or active devices (such as filters or amplifiers). The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures. It is mainly used for on-site operation. The equipment is sturdy and durable, light in weight, and low in energy consumption. It enables service centers and maintenance teams to perform on-site HF analysis for commissioning and repair work. In addition, spectrum analyzer is the perfect solution for repair shops and radio enthusiasts.

Features

(8.12 cm) 3.2 in color resistive touch screen
35 MHz to 6200 MHz frequency range
500 points per sweep
2 dB accuracy in 70 dB to 75 dB dynamic range
Windows compatibility
PC connectivity
Convenient use
Compact size 5.91 in x 2.95 in x 0.91 in (150 mm x 75 mm x 23 mm)
Lightweight 0.83 lb (380 g)
4 hour independent power supply
Wired data transmission to PC

Technical Specifications

Display	(8.12 in) 3.2 in color resistive touch screen
Frequency Range	35 MHz to 6200 MHz
Sweep Capability	500 points per point
Measurement Accuracy	2 dB within 70 dB to 75 dB dynamic range
Display Frequency Range	35 MHz to 6200 MHz
Measuring Frequency Range	35 MHz to 4500 MHz
Dynamic Range	75 dB
Dynamic Range	70 dB
Maximum Span	6165 MHz
Bandwidth	200 kHz, fixed
Scanning Speed	700 MHz or sec
Sweep 100 MHz	< 0.25 seconds
Noise Floor	< -90 dBm
Noise Floor	< -85 dBm
Noise Floor	< -80 dBm
Wave Impedance	50 ohms
Standing Wave Ratio (	< 1.5
Internal Attenuator	0 dB to 30 dB
Error at Attenuation up to 10 dB	2 dB
Attenuation Error	5 dB
Attenuation Error	8 dB
Tracking Generator Output Power	-15 dBm to -25 dBm
Accuracy in Dynamic Range	2.0 dB
Maximum Input Power of Attenuator at 0 dB	10 dBm
Maximum Input Power when Attenuation > 20 dB	+20 dBm
Maximum Input Measurement Signal	+10 dBm
Maximum Input DC Voltage	25 V
Maximum Current Consumption	450 mA
Maximum Current Consumption	500 mA
Battery	2500 mAh
Duration Time	3 hours
Battery Charging Time	to 5 hours
Compatibility	Windows-based computers
PC Connectivity	Can be used with a PC
User Convenience	Particularly convenient to use
Power Supply	Independent power supply, up to 4 hours of operation
Data Transmission	Wired data transmission to a PC
Weight	0.8 lb (380 g)
Size	5.9 in x 3 in x 0.9 in (150 mm x 75 mm x 23 mm)